The purpose of this product is to provide a easy to the SF6 gas density relay SF6 electrical switch to check or replace the connector, so that the power maintenance personnel don't have to remove the connector, can check of SF6 gas density relay or random change, bring convenience for the operation of the electric power maintenance personnel, can greatly improve the work efficiency.
 
 Advatage
1. It is very convenient to measure the moisture content of SF6 switch
2. It is very convenient to replenish air on SF6 switch
3. Density relays can rotate 360 degrees
4. One person can operate independently
5. Convenient, labor-saving, time-saving
 
 Specification
1. Measuring range: -0.1-0.9mpa
2. Accuracy: 20℃±1℃ grade 1; - 30 ℃ to 60 ℃; - 45 ℃, 70 ℃ when the magnitude of 1.5
3. Dimensions: See schematic diagram of dimensions
4. Joint thread: M20×1.5. (Available on request)
5. Operating conditions: Ambient temperature: -40-60℃, atmospheric pressure 86-106kpa. Relative temperature ≤ 95%RH
6. Insulation strength: AC2800V/1min 50HZ
7. Insulation resistance: >500M
8. Vibration resistance: 20m/ S2
9. Impact resistance: 30g (duration: 7ms)
10. Protection level: IP64
11. Annual leakage rate: no more than 1x10-15Mpa.m3 / s
12. Contact capacity: 250V(AC/DC) 50VA/30W. Maximum working voltage: AC 380V
13. Wiring signs

Application of Stainless Steel Pressure Gauge

• Oil and Gas

• Petrochemical Industry

• Electrical Equipment

• Mechanical Processing

• Food and Beverage

• Biopharmaceutical Industry

Feature of Stainless Steel Pressure Gauge

• Corrosion-Resistant

• IP54 protection rating.

• Intuitive display

• Suitable for installation in various environments.

• Case material: stainless steel

• Wetted parts: stainless steel

• Dial customization